308 research outputs found

    Broadband stimulated four-wave parametric conversion on a tantalum pentoxide photonic chip

    No full text
    We exploit the large third order nonlinear susceptibility (?(3) or “Chi 3”) of tantalum pentoxide (Ta2O5) planar waveguides and realize broadband optical parametric conversion on-chip. We use a co-linear pump-probe configuration and observe stimulated four wave parametric conversion when seeding either in the visible or the infrared. Pumping at 800 nm we observe parametric conversion over a broad spectral range with the parametric idler output spanning from 1200 nm to 1600 nm in infrared wavelengths and from 555 nm to 600 nm in visible wavelengths. Our demonstration of on-chip stimulated four wave parametric conversion introduces Ta2O5 as a novel material for broadband integrated nonlinear photonic circuit applications

    On Redundancy Reduction of Non-Recursive Second-Order Spectral-Null Codes

    Get PDF
    The code design problem of non-recursive second-Order Spectral Null (2-OSN) codes is to convert balanced information words into 2-OSN words employing the minimum possible redundancy. Let kk be the balanced information word length. If k2INk\in \,\,2 {{I}}{{N}} then the 2-OSN coding scheme has length n=k+rn=k+r , with 2-OSN redundancy r2INr \in \,\,2 {{I}}{{N}} and n4INn\in \,\,4 {{I}}{{N}} . Here, we use a scheme with r=2logk+Θ(loglogk)r=2 \log k+\Theta (\log \log k) . The challenge is to reduce redundancy even further for any given kk . The idea is to exploit the degree of freedom to select from more than one possible 2-OSN encoding of a given balanced information word. To reduce redundancy, empirical results suggest that extra information δk=0.5logk+Θ(loglogk)\delta _{k}=0.5 \log k+\Theta (\log \log k) is obtained. Thus, the proposed approach would give a smaller redundancy r=1.5logk+Θ(loglogk)r^{\prime }=1.5 \log k+\Theta (\log \log k) less than r=2logk+Θ(loglogk)r=2 \log k+\Theta (\log \log k)

    Photonic chip based transmitter optimization and receiver demultiplexing of a 1.28 Tbit/s OTDM signal

    Get PDF
    We demonstrate chip-based Tbaud optical signal processing for all-optical performance monitoring, switching and demultiplexing based on the instantaneous Kerr nonlinearity in a dispersion-engineered As 2S 3 planar waveguide. At the Tbaud transmitter, we use a THz bandwidth radiofrequency spectrum analyzer to perform all-optical performance monitoring and to optimize the optical time division multiplexing stages as well as mitigate impairments, for example, dispersion. At the Tbaud receiver, we demonstrate error-free demultiplexing of a 1.28 Tbit/s single wavelength, return-to-zero signal to 10 Gbit/s via four-wave mixing with negligible system penalty (< 0.5 dB). Excellent performance, including high fourwave mixing conversion efficiency and no indication of an error-floor, was achieved. Our results establish the feasibility of Tbaud signal processing using compact nonlinear planar waveguides for Tbit/s Ethernet applications

    Time domain add-drop multiplexing scheme enhanced using a saw-tooth pulse shaper

    No full text
    We experimentally demonstrate the use of saw-tooth optical pulses, which are shaped using a fiber Bragg grating, to achieve robust and high performance time-domain add-drop multiplexing in a scheme based on cross-phase (XPM) modulation in an optical fiber, with subsequent offset filtering. As compared to the use of more conventional pulse shapes, such as Gaussian pulses of a similar pulse width, the purpose-shaped saw-tooth pulses allow higher extinction ratios for the add and drop windows and significant improvements in the receiver sensitivity for the dropped and added channels

    Adaptive Dispersion Compensation for Remote Fiber Delivery of NIR Femtosecond Pulses

    Full text link
    We report on remote delivery of 25 pJ broadband near-infrared femtosecond light pulses from a Ti:sapphire laser through 150 meters of single-mode optical fiber. Pulse distortion due to dispersion is overcome with pre-compensation using adaptive pulse shaping techniques, while nonlinearities are mitigated using an SF10 rod for the final stage of pulse compression. Near transform limited pulse duration of 130 fs is measured after the final compression.Comment: 3 pages, 4 figure

    EEG data analysis with stacked differentiable neural computers

    Full text link
    © 2018, Springer-Verlag London Ltd., part of Springer Nature. Differentiable neural computer (DNC) has demonstrated remarkable capabilities in solving complex problems. In this paper, we propose to stack an enhanced version of differentiable neural computer together to extend its learning capabilities. Firstly, we give an intuitive interpretation of DNC to explain the architectural essence and demonstrate the stacking feasibility by contrasting it with the conventional recurrent neural network. Secondly, the architecture of stacked DNCs is proposed and modified for electroencephalogram (EEG) data analysis. We substitute the original Long Short-Term Memory network controller by a recurrent convolutional network controller and adjust the memory accessing structures for processing EEG topographic data. Thirdly, the practicability of our proposed model is verified by an open-sourced EEG dataset with the highest average accuracy achieved; then after fine-tuning the parameters, we show the minimal mean error obtained on a proprietary EEG dataset. Finally, by analyzing the behavioral characteristics of the trained stacked DNCs model, we highlight the suitableness and potential of utilizing stacked DNCs in EEG signal processing

    Single parameter optimization for simultaneous automatic compensation of multiple orders of dispersion for a 1.28 Tbaud signal

    Get PDF
    We report the demonstration of automatic higher-order dispersion compensation for the transmission of 275 fs pulses associated with a Tbaud Optical Time Division Multiplexed (OTDM) signal. Our approach achieves simultaneous automatic compensation for 2nd, 3rd and 4th order dispersion using an LCOS spectral pulse shaper (SPS) as a tunable dispersion compensator and a dispersion monitor made of a photonic-chip-based all-optical RF-spectrum analyzer. The monitoring approach uses a single parameter measurement extracted from the RF-spectrum to drive a multidimensional optimization algorithm. Because these pulses are highly sensitive to fluctuations in the GVD and higher orders of chromatic dispersion, this work represents a key result towards practical transmission of ultrashort optical pulses. The dispersion can be adapted on-the-fly for a 1.28 Tbaud signal at any place in the transmission line using a black box approach

    Highly-nonlinear chalcogenide glass devices for high-speed signal processing and characterization

    Get PDF
    We review the latest advances in dispersion-shifted Chalcogenide waveguides enabling highly nonlinear and low dispersion planar rib circuits of centimetre length. Its performance advantages for more broadband and higher speed nonlinear signal processing are shown
    corecore